How to Jailbreak iOS 9.3.3 With Pangu English Version

To Jailbreak iOS 9.3.3 in a comprehensive way, Pangu has dropped a new Pangu version with English language support. So now you can try this new tool version if you were confused with only Chinese Pangu 9.3.3 released a week before. In this brief guide we hope to cover most of the important facts about iOS 9.2-iOS 9.3.3 Jailbreak, including the step guide for English version. So read on and know how to properly work with this new Pangu download following a successful Jailbreak.

Jailbreak iOS 9.3.3

Even though this tool helps you to go for a jailbreak even staying at an older firmware from iOS 9.2 to above, we recommend updating iOS 9.3.3 as it is the latest  jailbreakable firmware comes with newest needed fixes and security improvements too. So get the latest on your iPhone, iPad or iPod touch and then turn iOS 9.3.3 Jailbreak.

Pangu English Version vs Pangu Chinese

Even though Pangu 9.3.3 made a lot of jailbreak fans happy, it has made some confusions too on getting the new jailbreak or not as there were some limitations with the original Pangu tool release. Among them, Chinese language help and Windows-only were most talked. But now it is time to end worrying as Pangu 9.3.3 English version is in public hand as an improvement over the original release. So now you can jailbreak iOS 9.3.3 with Pangu 9.3.3 English version at the same time with a Windows PC, Mac or Linux help. In that way, you have no reason to worry on the errors with browser-based too which was left aside until Pangu fixes.

Since you now have a English version, more jailbreakers have chance to follow the jailbreak with a good understanding too. But we thought of giving an easy step guide to make you clearer about what to follow and not. So go through our complete guide to jailbreak iOS 9.3.3 with Pangu English version. It is important to remember, this is still not untethered and everything will be done as to the Semi-untethered format.

Supported Devices:

Just like the Original Chinese Pangu version, this new English Pangu also works only on 64-bit device models. And we hardly got a chance to expect 32-bit support for iOS 9.3.3. And it is clearer with the official statement Pangu has made recently saying  “Sorry there is no plan for 32-bit now”. In that way, below given are the compatible devices to jailbreak iOS 9.3.3.

  • iPhone 5s
  • iPhone 6 and iPhone 6 Plus
  • iPhone 6s and iPhone 6s Plus
  • iPhone SE
  • iPod touch 6G
  • iPad mini 2, iPad mini 3 and iPad mini 4
  • iPad Air and iPad Air 2
  • iPad Pro

Pangu English Version-Jailbreak Guide

Please Consider:

  • Update your device to latest iOS 9.3.3 before head to jailbreak
  • Make a complete backup of your device’s data, to keep all your data safe
  • Charge your device’s battery for a sufficient power scale (At least 60-70%)
  • Get ready with a Windows PC, Mac or Linux and also a proper USB
  • Temporary disable your passcode and Find My iPhone option on the device
  • Make a new Apple ID (Secondary) which is needed to the process

How-to?

  • Step 1: Download IPA file and Cydia impactor(From genuine download pages)
  • Step 2: Connect your Device to the PC, Mac or Linux with a MFI-certified USB cable
  • Step 3: Open the downloaded Cydia impactor file (In Mac you will have to drag the app to the Application folder)
  • Step 4: Then open the impactor file to get the interface like shown below

jailbreak iOS 9.3.3

 

  • Step 5: After that, drag the downloaded IPA file over the interface

Jailbreak iOS 9.3.3

  • Step 6: In the next step, you have to click “OK” to continue through the Apple Developer warning

jailbreak iOS 9.3.3

  • Step 7: In the next interface, enter Apple ID (Secondary Apple ID)
  • Step 8: Once you logged in by clicking the blue “OK”, you have to wait for few minutes until Cydia impactor is done displaying several texts. Once finished you will notice the “Start”  button in Cydia impactor app

jailbreak iOS 9.3.3

  • Step 9: So close the app, and go to your iOS Home screen to see Pangu app icon

Jailbreak iOS 9.3.3

  • Step 10: Then open your device’s Settings app > General > Device management

Jailbreak iOS 9.3.3

  • Step 11: After that, tap on the certificate and trust the certificate by tapping the red “Trust” button
  • Step 12: Then launch Pangu app from Home screen (Be sure to allow push notifications)
  • Step 13: Tap on “Start” in the Pangu app

Jailbreak iOS 9.3.3

  • Step 14: Pres Sleep button and lock your device. Then you will see the notification on the lock screen

jailbreak iOS 9.3.3

  • Step 15: Then let your device to respring taking a few minutes (The storage of your device is getting full notification will receive when Cydia installing)
  • Step 16: After several minutes, you will notice Cydia on your Home screen, so launch Cydia and allow refreshing the sources

jailbreak iOS 9.3.3

By now you have successfully jailbroken your iOS 9.3.3 with Pangu. Even though the process is lengthier you would not feel dis-comfortable hereafter as Pangu English version helps you to follow the whole process with a clear understanding.

Jailbreak iOS 9.3.3 Video Guide

When launching Cydia 9.3.3 for the first time, you will have to wait patiently as Cydia file system needs more time to get prepared. As that is only for the first attempt, you can get a vast Cydia 9.3.3 with all your favorite Cydia app and tweaks. Currently, Cydia has been expanding its capabilities to latest iOS 9.3.3, so you would get more Cydia apps to work after jailbreak iOS 9.3.3. Until then you are advised to read the description of each and every Cydia app/tweak before hit download.

Please Note: After you are successfully jailbroken with Pangu 9.3.3, it will install a third part App store in your iOS from 25PP. It is no harm of keeping, but as it is connected to the piracy and some security threats you are highly advised to remove the app store soon after you are successfully done Pangu 9.3.3 jailbreak.

Does this Jailbreak Expire?

As this semi-untethered jailbreak needs to get connected with Apple certificate which is bound to get expired depending on the type. If you are having a regular Apple ID, you will have to re-jailbreak your iOS in 7 days ahead. If you are having a developer certificate, it will give you a year time. In that way, until Pangu make changes with certificate relation, iOS 9.3.3 jailbreak will be expired with the certificate expiry.

How to Unjailbreak iOS 9.3.3?

As of this writing, Cydia impactor is not supported to latest iOS 9.3.3. So you are recommended to restore through iTunes, if you feel of not keeping this new jailbreak. So you can simply unjailbreak iOS 9.3.3 and take it back to the way it was. (restore from your backup)

This is simply the way you can jailbreak iOS 9.3.3 with new Pangu English version. As currently, the Safari-based is not working you can either choose Pangu jailbreak Chinese version or this new version with English language help. Even though there are slight differences between these two versions, both are semi-untethered and have to re-launch the app each and every time you reboot. So we think you can easily run the process with English Pangu jailbreak which is clearer and accepted by all platforms too. So Jailbreak iOS 9.3.3 with new Pangu and start your Cydia 9.3.3 chapter in the best way.

 

iOS 9.3.3 Jailbreak Finally Landed

For those who are still unaware, iOS 9.3.3 jailbreak is now possible with Pangu new tool that came addressing all iOS 9.2-iOS 9.3.3. So Cydia is now ready to start from where it has stopped giving the chance for a majority. Anyone in any iOS version can now update iOS 9.3.3 and simply jailbreak with latest Pangu 9.3.3 download. So go through our guide where we wish to cover all needed information about newest jailbreak iOS 9.3.3 including the step guide.

iOS 9.3.3 jailbreak

As of now, the tool only with Chinese language help at the same time as Windows-only. That may be because of something to arrive, so be awake as an updated tool has a lot of weight to drop soon.

As this jailbreak is Windows-only, you will have to be prepared with a PC or Mac running either Bootcamp or a virtual machine Windows, if not you are not access to perform this PC version. Even though everyone was expecting an untethered jailbreak over Pangu v1.3.1, the current latest. Pangu has come with a surprising tool release which better call Semi-untethered. So you will be able to experience both tethered and untethered qualities in latest Pangu 9.3.3 which will make you to re-run the app every time you reboot the device.

iOS 9.3.3 Jailbreak – Supported Devices

Currently, the tool only to cater 64-bit device models. So 32-bit device models will have to wait for an update from Pangu jailbreak side to get the new tool support to jailbreak iOS 9.3.3. Below given are device models currently Pangu 9.3.3 supported, so check whether it has given space for your device name too.

  • iPhone 5s
  • iPhone 6, iPhone 6 Plus
  • iPhone 6s and iPhone 6s Plus
  • iPhone SE
  • iPod touch 6G
  • iPad mini 2, iPad mini 3, iPad mini 4
  • iPad Air, iPad Air 2
  • iPad Pro

Jailbreak Guide

As Pangu 9.3.3 on in Chinese version as of this writing, you must follow our guidelines for a successful jailbreak, be sure to run the process with caution. Even though you can jailbreak with latest Pangu tool staying on any iOS version from iOS 9.2 to latest, we highly recommend you to update iOS 9.3.3 as it features more security and fixes at the same time being the latest jailbreakable firmware. So for a stable iOS experience get iOS 9.3.3 even though you are a jailbreaker or not.

Consider Before proceed:

  • As prevention is better than cure, make a complete backup prior getting started with process and that will make your device’s content safe preventing getting harmed or loosed
  • Disable Touch ID or Passcode (Settings > General > Touch ID & Passcode)
  • Turn off Find My iPhone (Settings > iCloud > Find my iPhone)
  • As tool is only for Windows at the moment, get the help of a windows PC or virtual machine setup. Also get ready with a proper USB cable that supports your device model
  • Install latest iTunes version to your PC
  • Have a stable internet connection
  • Charge your iDevice to a sufficient power scale (At least about 60-70%) as jailbreak might take minutes to hours
  • In the process, you will be asked for your Apple ID, so we recommend you to create a secondary Apple ID that not linked to your primary account

Step By Step Guide to iOS 9.3.3 Jailbreak with Pangu

  • Step 1: Click below to Download Pangu installer on your PC

pangu installer

  • Step 2: Right-click on the downloaded file to “Run as Administrator”

Pangu Download

  • Step 3: Then click “Yes” to trust publisher when Windows asked and have to “Trust” the connection when you get the notification from Windows firewall

iOS 9.3.3 jailbreak with Pangu

  • Step 4: Click on the only button in the next interface to start downloading Pangu jailbreak tool

Pangu download

  • Step 5: After Pangu successfully installed in your Home screen, connect your iDevice to the computer with the USB cable
  • Step 6: Then again right-click on the newly installed Pangu app to “Run as Administrator”. To continue click “Yes” in the next interface like shown below

Pangu Download

  • Step 7: In the next step, tool interface will start searching for the connected devices. As soon as Pangu detected your iPhone, iPad or iPod touch, click the green button to proceed

Pangu download

  • Step 8: In the next interface you will have to enter the Apple ID to continue, so there enter the secondary Apple ID you created and click the green button to log in

Pangu Download

  • Step 9: Then Pangu will successfully install to your device’s Home screen, so go to device’s Settings > General > Device Management

Pangu Download

  • Step 10: In the profile appears next, click “Trust” button in blue (With your email address)
  • Step 11: In the next interface tap on red “Trust” button to trust the profile successfully
  • Step 12: After that, launch Pangu/PP app from Home screen and remember to allow notifications

Pangu jailbreak

  • Step 13: Then click on the circle appeared in the next screen which will turn into a text line a few seconds after you clicked. Your device have to lock by then and you will get a notification too

Pangu download

  • Step 14: In few seconds, you will get a notification saying your device’s storage is getting full, that is normally get in the process and ignore once you received. Then unlock your device and launch Pangu/PP (You will see Cydia is getting installed)
  • Step 15: Wait for few minutes letting your device automatically reboots, then you will be able to Cydia on your Home screen as the result of successful iOS 9.3.3 jailbreak

Video Guide to iOS 9.3.3 Pangu Jailbreak

About 15 steps later, you can now start with Cydia on your iOS 9.3.3 jailbroken iDevice. When reaching for the first time you will have to wait patiently until Cydia get prepared with the file system. After that you can try best Cydia apps and tweaks on your iOS 9.3.3 with latest jailbreak rights. In some cases you will find errors when downloading Cydia tweaks. To prevent getting disturbed read the tweak description carefully in respect to each and every individual tweak as developers are still experimenting on expanding tweaks for latest Cydia iOS 9.3.3. So until you gets updates enjoy Cydia additions in 2016 checking the compatibility.

As the Pangu new tool still in its very first days , you will find it buggy in some cases. So if you fail within the process, try multiple times until you get succeeded. And do not lose hopes for another Pangu version in an updated interface soon, answering all bugs and clashes you met with new Pangu download upto now.

Is iOS 9.3.3 Jailbreak Possible without a PC?

Not more than taking a day from iOS 9.3.3 Jailbreak release, developers has found an alter guide as solution for those who do not prefer Window-only concept of latest Pangu 9.3.3. In that way iOS 9.3.3 jailbreak without a PC is now possible with a new way inspired by JailbreakMe concept. So it will sound simpler and easier as a browser-based but still it is remained on Semi-untethered where rebooting will make you re-launch to the jailbreak like what we saw in the PC format. If you feel this sounds cooler, check the video guide below and let us too know how you see iOS 9.3.3 jailbreak without the PC.

iOS 9.3.3 Unjailbreak

As iOS 9.3.3 is a semi-untethered jailbreak, you can easily unjailbreak if you not feel of keeping the jailbreak. In fact you only need to reboot your device simply to iOS 9.3.3 unjailbreak. So you can unjailbreak staying in the same iOS version without upgrading or with a tool help like in previous cases.

All who were sick of the long wait, now has the best reason to cheer. So head to iOS 9.3.3 jailbreak with new Pangu tool version and start playing with Cydia 9.3.3. As to the trusted sources more updates are still to come, so you will probably get a chance for more comprehensive English version soon with 32-bit device support too. If you cannot wait for the next update try iOS 9.3.3 jailbreak with our guide, and visit us regularly to know more interesting facts about new Pangu which is most discussed thread these days.

iOS 9.3.3 download as the version brings you next jailbreak?

iOS 9.3.3 jailbreak

The third seed of the iOS 9.3.3 was fallen 21st of June for developers. Following usual paths of installing, OTA and developer’s site are accessible with its build number 13G29. As all were anxious knowing details of iOS 10, seems the version still holding the iOS 9 session has been forgotten. But we are going to unroll it here from the begging of its first beta.

When the major transfer of the version will be there, it is the 10th major release of iOS 9 led by iOS 9.3 download. However, it seems iOS 9.3.3 download often be the edge of this season as iOS 10 has already welcomed just before few weeks.

download iOS 9.3.3

Beta series of iOS 9.3.3 download

Beta 1 download

The iOS 9.3.3 install was commenced just passed a couple of days from the iOS 9.3.2 download. While iOS 9.3.2 has an error of corrupting install iOS 9.3.2 for 9.7 inch iPad Pro, Apple had to re-release the same including fixed areas. So the recover arranged in 20th of June before few days for iOS 9.3.3 beta 1.

Thus, when the time comes for the download of iOS 9.3.3, the first beta was reported for all iDevices of the same list except iPad Pro. However, clearly, this is a version which addressed higher and smooth performances and bug fixes as well. Also, there was a talk of its release note as it was arranged as a one of iOS 9.3.2.

Beta 2 download

The second beta seeded on 6th of June with all adjustments of the previous beta for the addressed areas properly.

Beta 3 of the version

iOS 9.3.3 download

This is the one we are to continue from here to see whether Apple draw the expected performances up to here. As a beta version after the cornerstone of iOS 10, it got a little bit delay. However, the beta release was captured both public beta testers and developers as well, at the same time. Official sources too haven’t fall for its updates.

Jailbreak status 9th session of iOS

iOS 9.3.3 jailbreak

 iOS 9.3.2 download as the dwelling version for the iOS 9 session, all current jailbreak updates are narrating surround it. However, we have already unrolled all details we found of our site. But in this case, the tool we have to be used in future must be a captured one of all these. Mostly it is because for users of dropped out of the competence devices of iOS 10 as their final highest upgradable iOS version. As even hackers demoed their triumphed iOS 10 jailbreak as well, Cydia download iOS 9.3.3 for the next period is not at a great distant.

Anyhow, you can browse us for what we bring you here daily from here. As rumors detailing the final jailbreak will be there after iOS 9.3.3 will be there to the public, keep your Cydia to upgrade jailbreak iOS 9.3.3. So we hope, at least iOS 9.3.3 Cydia will be our skip before iOS 10 download from another short period.